SK30 ER collet chucks
SK30 (ISO 30) ER32 Collet Chucks (DIN 69871): Gauge Lengths 60 and 100 mm
SK30 (ISO 30) ER32 collet chucks hold round-shank drills, reamers and end mills in a DIN 6499 ER32 collet, closed by the ER32 clamping nut (M22x1.5). PTP makes them with an SK shank (DIN 69871 / ISO 7388-1) in gauge lengths of 60 and 100 mm, for tool shanks of 2–20 mm. Ordering codes: 2. SK30 holders are pulled into the spindle by an M12 DIN 69872 pull stud. Taper AT3 or better, TIR 0.005 mm max, balanced G2.5 @ 25,000 rpm.
SK30 (ISO 30) ER32 collet chucks: 2 ordering codes
Every ordering code opens its own page with the drawing and every dimension (mm).
| Ordering code | Clamping Range | Nut Ø (d) | Gauge Length (GPL) |
|---|---|---|---|
| 47ISO30ER3260 | 2–20 mm | 50 mm | 60 mm |
| 47ISO30ER32100 | 2–20 mm | 50 mm | 100 mm |
SK30 ER32 collet chuck
PTP catalogue drawing, dimensions in mm
Questions about SK30 ER32 collet chucks
What is the clamping range of an SK30 ER32 collet chuck?
2–20 mm. ER32 collets to DIN 6499 clamp tool shanks from 2 to 20 mm, one collet for each size step.
Which pull stud does an SK30 ER32 collet chuck need?
An M12 SK30 pull stud: DIN 69872 with a 15° head.
Which nut and collets fit an SK30 ER32 collet chuck?
ER32 collets to DIN 6499 and the ER32 clamping nut: slotted 36CCNER32. For coolant-through tools, an ER32 sealing ring (15 sizes, 36CCNER32SR060 to 36CCNER32SR200).