HSK-A100 ER collet chucks
HSK-A100 ER16 Collet Chucks (DIN 69893-1): Gauge Lengths 100 and 160 mm
HSK-A100 ER16 collet chucks hold round-shank drills, reamers and end mills in a DIN 6499 ER16 collet, closed by the ER16 clamping nut (M10x1). PTP makes them with an HSK-A shank (DIN 69893-1 / ISO 12164-1) in gauge lengths of 100 and 160 mm, for tool shanks of 1–10 mm. Ordering codes: 2. HSK-A tapers are clamped by the spindle itself, so no pull stud is needed. Taper AT3 or better, TIR 0.005 mm max, balanced G2.5 @ 25,000 rpm.
HSK-A100 ER16 collet chucks: 2 ordering codes
Every ordering code opens its own page with the drawing and every dimension (mm).
| Ordering code | Clamping Range | Nut Ø (d) | Gauge Length (GPL) |
|---|---|---|---|
| 47HSKA100ER16100 | 1–10 mm | 28 mm | 100 mm |
| 47HSKA100ER16160 | 1–10 mm | 28 mm | 160 mm |
HSK-A100 ER16 collet chuck
PTP catalogue drawing, dimensions in mm
Questions about HSK-A100 ER16 collet chucks
What is the clamping range of an HSK-A100 ER16 collet chuck?
1–10 mm. ER16 collets to DIN 6499 clamp tool shanks from 1 to 10 mm, one collet for each size step.
Does an HSK-A100 ER16 collet chuck need a pull stud?
No. The spindle clamps the HSK-A taper from inside. For through-spindle coolant it takes the 47CTHA100 HSK coolant tube.
Which nut and collets fit an HSK-A100 ER16 collet chuck?
ER16 collets to DIN 6499 and the ER16 clamping nut: slotted 36CCNER16 or hex 36CCNER16A. For coolant-through tools, an ER16 sealing ring (5 sizes, 36CCNER16SR060 to 36CCNER16SR100).
ER collets DIN 6499 Slotted ER collet nuts Hex ER collet nuts ER sealing rings